液壓驅動單元

Hägglunds DUe

特征

• 模塊化設計
• 閉合式隔音柜
• 垂直裝配 - 占地面積小
• 可針對多種應用和客戶需求進行配置
• 配有 Hägglunds 先進控制系統

• 產品說明

  General

  The DUe drive unit provides the hydraulic motor(s) with required hydraulic oil flow and pressure together with system control functionality.

   

  The drive unit is divided to 4 basic sizes depending on electric motor power and hydraulic flow requirements:

  Compact (C)

  ?

  Small (S)

  ?

  Medium (M)

  ?

  Large (L)

  ?

  The drive units are built with one, two or three hydraulic compartments.

  C has one compartment.

  S, M and L can have 2 or 3 compartments depending on required number of pumps. 2 and 3 compartment contains one with the hydraulic oil tank and one or two with the electric motor/pump combination. All compartments are assembled in one common cabinet.

  The basic combinations will be DUe C1, DUe S2, DUe S3, DUe M2, DUe M3, DUe L2 and DUe L3.

  A single compartment cabinet can be added to the M and L variants for higher flow requirements, for emergency drives or as standby unit.

   

  The drive unit supports functionality for one or two driven machine shafts.

  Functions as cold/warm flushing and brake circuits for the hydraulic motors are available as options.

  The drive unit has an embedded control system with a large variety of configurable functionality to simplify the control and monitoring of the hydraulic drive.

  The control system is pre-programmed and easy to configure and contains functions as:

  Variable-speed control

  ?

  Speed feedback

  ?

  Power limitation

  ?

  Industrial fieldbus communication

  ?

  Analog and digital signal monitoring

  ?

  Pressure control (torque control)

  ?

  and application specific functions as:

  Friction control

  ?

  Shedder control

  ?

  Synchronized control

  ?

  For detailed functionality and configuration, see data sheet for Hägglunds Spider Control System, EN777.

  The DUe drive unit can be delivered without control system if required. All electrical wiring for sensors and pump control will be wired to a junction box assembled on the side of the drive unit. Driver card for pump can be assembled as an alternative in the junction box or in a separate box.

  Monitoring of the drive unit sensors must be handled externally (see chapter "Symbols/Circuit diagrams" - Figure "Monitoring logic diagram").

   

  The drive unit is available for:

  Power ranges from 11 kW to 2 x 500 kW.

  ?

  Flow ranges up to 3000 l/min at 1500 rpm (3600 l/min at 1800 rpm).

  ?

  Working pressure max 350 bar.

  ?

  Combination of pump and electric motor

  預定義組合，電源模塊/流量模塊

  ●		可配置驅動單元
  ○		定制驅動單元
  ⊙		該配置將放置在中型機座中。不允許將 SP250 單級泵放置在小型機座中。
  單級泵
  泵 SP											泵 HD
  			40	71	125	180	250	355	500	750	HD63	HD75	HD115	HD145	HD245	HD305
  緊湊型 (C)	電動機	11	●
  		15	●
  		22	●	●
  		30	●	●	●
  		37		●	●	●
  		45		●	●	●
  		55		●	●	●
  		75			●	●
  		90			●	●
  小型 (S)		11	○
  		15	○
  		22	○	●							●
  		30	○	●	●						●	●
  		37		●	●	○					●	●
  		45		●	●	●					●	●	●
  		55		●	●	●	⊙				●	●	●
  中型 (M)		75			●	●	○	○			●	●	●	●
  		90			●	●	●	○				●	●	●	●
  		110				●	●	●	○				●	●	●
  		132				●	●	●	●				●	●	●	●
  		160				●	●	●	●				●	●	●	●
  		200					●	●	●					●	●	●
  大型 (L)		250						●	●	●					●	●
  		315							●	●					●	●
  		355							●	●						●
  		400								●
  		500								○

  

   

  預定義組合，串聯泵電源模塊/流量模塊

  ●		可配置驅動單元
  ○		定制驅動單元
  串聯泵
  泵 SP											泵 HD
  			40	40	71	40	71	125	40	71	125	180	40	71	125	180	250	40	71	125	180	250	355	40	71	125	180	250	355	500
  			40	71	71	125	125	125	180	180	180	180	250	250	250	250	250	355	355	355	355	355	355	500	500	500	500	500	500	500
  中型 (M)	電動機	11
  		15
  		22	○
  		30	○	○	○
  		37	○	○	○	○
  		45	○	○	○	○
  		55	○	○	○	○	○
  		75		○	○	○	○	○	○	○	○	○	○	○	○
  		90		○	○	○	○	●	○	○	○	○	○	○	○	○
  		110			○	○	○	●	○	○	○	●	○	○	●	○	○	○	○	○	○			○
  		132				○	○	●	○	○	○	●	○	○	●	○	●	○	○	○	○	●	○	○	○	○
  		160						●	○	○	○	●	○	○	●	○	●	○	○	○	○	●	●	○	○	○	○	●	○
  		200						●		○	○	●	○	○	●	○	●	○	○	○	○	●	●	○	○	○	○	●	●
  大型 (L)		250										●		○	●	○	●	○	○	○	○	●	●	○	○	○	○	●	●	●
  		315														○	●	○	○	○	○	●	●	○	○	○	○	●	●	●
  		355															●			○	○	●	●	○	○	○	○	●	●	●
  		400																			○	●	●	○	○	○	○	●	●	●
  		500																					○			○	○	●	●	●

  

  類型代碼

  In order to identify Hägglunds equipment, the following ordering code is used.

  01	02		03	04		05		06		07		08		09		10		11		12		13		14		15		16
  DU	E	?			?		/		?		+		/		+		?		?		?		?		?		/

  

   

  01	液壓驅動單元		DU
  型號
  02	優良		E
  機座大小
  03	緊湊型機座		C
  	小型機座		S
  	介質機座		M
  	大型機座		L
  液壓室數
  04	單室		1
  	二室		2
  	三室		3
  電動機規格
  05 06	電功率 (kW) ? 右側隔室 電功率 (kW) ? 左側隔室		011
  			015
  			022
  			030
  			037
  			045
  			055
  			075
  			090
  			110
  			132
  			160
  			200
  			250
  			315
  			355
  			400
  			500
  泵規格 SP 泵 - 上部
  07 09	泵規格 (cm3) SP 泵 - 上部右側隔室 泵規格 (cm3) SP 泵 - 上部左側隔室		040
  			071
  			125
  			180
  			250
  			355
  			500
  			750
  泵規格 HD 泵 ? 上部
  07 09	泵規格 (cm3) HD 泵 - 上部右側隔室 泵規格 (cm3) HD 泵 - 上部左側隔室	HD6S	098
  		HD7S	119
  		HD11S	180
  		HD14S	229
  		HD24S	403
  		HD30S	501
  泵規格 SP 泵 - 下部
  08 10	泵規格 (cm3) SP 泵 - 下部右側隔室 泵規格 (cm3) SP 泵 - 下部左側隔室		040
  			071
  			125
  			180
  			250
  			355
  			500
  爆炸性環境
  11	請勿在爆炸性環境中使用		0
  	ATEX 氣體類別 3G T3（區域 2）		1
  	ATEX 氣體類別 3G T4（區域 2）		2
  	ATEX 氣體類別 2G T3（區域 1）		3
  	ATEX 氣體類別 2G T4（區域 1）		4
  	其他		9
  冷卻器類型
  12			A
  	水油冷卻器		W
  電動機
  13	包括在液壓驅動單元中		Y
  	客戶提供		N
  控制系統
  14	Hägglunds 星形接頭控制系統		S
  	無控制系統 - 僅有接線盒		N
  	泵驅動器板卡解決方案：		D
  電壓
  15	主電壓
  頻率
  16	50 Hz		50
  	60 Hz		60

歡迎光顧 蘇 州 伊 洛 自 動 化 科 技 有 限 公 司 ！

如有需要，請咨詢 蘇州伊洛自動化科技有限公司 客服。 
蘇州伊洛自動化科技有限公司竭誠為您服務！

創新 推進 變革